![]() * Only the single-pack of the UAP-AC-LITE includes a PoE adapter. Connecting to a UniFi Switch with PoEĬonnect the Ethernet cable from the UniFi AP directly to a PoE port on the UniFi Switch with PoE. Use a UniFi Switch with PoE or a Gigabit PoE adapter for power. Nanotechnology at Michigan Technological University upgrades your qualifications and strengthens your ability to achieve in research, development, and manufacturing across disciplines in public and private sectors. Perform the steps for the appropriate installation. The device can be mounted on the wall or ceiling. Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise. If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.ĭuring installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft. Power can be provided by a Ubiquiti UniFi Switch with PoE or Gigabit PoE adapter (included with single-pack only). This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.Restart Press and release the Reset button quickly.The Reset button serves two functions for the UniFi AP: (This is described further in the Mounting Bracket section.) The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. IMPORTANT: The UAP-AC-LITE requires the UniFi Network Application v5.4 or newer, available at: ui.com/download/unifi Cat5/6 UTP cable for indoor installations. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |